This has been one of the most involved projects we've worked
on so far but it has been totally worth it. After figuring out the look we were
after, my husband drew out a plan of how to make it. Essentially, the library
consists of 5 cabinet bases, 5 bookshelf tops, and some trim to finish it off.
Since this is a built in library, we will talk about how we made it starting
with explaining how to build one bookshelf. If you have a larger or smaller
wall you would need to adjust accordingly. Here are the basic steps we
went through.
Tools we used:
- Table saw
- Skill saw
- Router
- Sander
- Craig Jig
- Air compressor
- Nail guns
- Screw gun
- Drill
- Wood clamps
- 2"x6" pine for the foundation
- 3/4” Birch cabinet-grade plywood for cabinets and bookshelves
- 3/16” laminated plywood for cabinet backing
- 1/4" barn siding plywood for bookshelf backing
- 3/4” poplar trim (various widths) for styles and rails
- Wood glue
- Screws
To start, we removed the baseboard trim and crown molding in way of the built-ins. Be careful when removing the trim because you’ll end up re-installing it when the built-ins are complete.
The cabinet bases are made of 4 main pieces: the two sides,
the bottom, and a shelf. We used a router with a ¾” bit to carve out slots for
the bottom and the shelf. Our workshop is in our unfinished basement, which we plan to finish someday soon. Here is a picture of the main pieces prior to assembly.
We then assembled the pieces using glue and screws and then added a
spreader (the top horizontal piece) and finished it off by nailing a 3/16”
plywood backing to the cabinet. We did this 5 times.
Meanwhile, back upstairs we made a foundation out of 2"x6" pine lumber for the cabinet bases to sit on. We made the foundation height such that
the top of the installed baseboard trim would come about 1” below cabinet
bottoms. Then we set the cabinet bases on the foundation and re-installed the
baseboard. We then added poplar styles and rails to the cabinet bases.
The cabinet top is made of the same birch plywood with a ½”
baton of poplar to hide the end grain. The hole in the wall is where the wiring comes out. There was a switched outlet on the bottom left of the wall which we planned to use for power for the sconces.
The next step was to make the book shelves. We used the same
router bit to cut slots for each shelf. We made the shelf spacing 12”. We chose 12" based on the largest books we had and what we wanted to put on the shelves.
Then we assembled the pieces using glue and screws.
And repeat!
If you are going to do something similar, I recommend
painting the bookshelves BEFORE installing the backing. It will save you a TON of
time. The backs were made of barn siding plywood and is relatively inexpensive, but rough. However, once you sand it down, it looks amazing. On another side
note, while we were sanding, we had a crazy visitor. I have no idea what this
bug is called but it freaked me out. It was HUGE!
After the backs were sanded, we primed, painted, then nailed them to the back of the completed cabinets.Then we brought the bookshelves upstairs and put them on top of
the cabinet bases. The spaces between the book shelves are for the wiring.
The next step was to start adding the trim. We started with
the top rail. We made the top rail fairly wide because it would also serve as
the backing for the raised crown molding. Then we added the stiles (vertical
boards) which covers the bookshelf joints and holds the sconces. The lighting we got at Overstock. At first we were looking at swing arm lamps that were gorgeous, but out of our budget; especially since we would need five. Then we decided on sconces since we would then only need four.
Nothing (not even this project) would stand
in the way of making our kids practice piano. That is why the piano never left
this space. We had to move it around quite a few times but it all worked out.
Then we added the rails for each shelf out of 1 ½” strips of
poplar and attached them using glue and nails. We then put the rest of the crown molding back up.
All that is left now are the cabinet doors. These were the
hardest part. My husband would write a whole post just about these doors but to
make a long story short, here is how we did them.
Each door is made of two stiles (the vertical pieces), two
rails (horizontal pieces), and a center panel. The slot in the middle of each
stile and rail was made with a table saw. The rails also have “tongues” (also made on a table saw) which
fit in the slot of the stiles. Here is the resulting frame prior to gluing it up.
We primed and painted each door in the basement before
installing them. We went with Blum Euro-style hinges from Amazon which require
blind holes in one stile.
We also covered the entire built-in with a protective polyurethane coat.
We added the doors to the cabinets and added our kitchen knobs (we decided to put some pulls in our kitchen, so this was an easy way to re-use knobs we already had). You can see our library reveal post here.
You can see my post on how I styled this beauty in this post and the transformation with the sconces using Rub N' Buff here.
I'm entering this project in Creating with Stars Contest! Come check it out and other amazing D.I.Y projects.
That bug is called a Wheel Bug. The description says “This insect is well-noted for its incredibly painful bite when disturbed or nonchalantly handled.” It’s also a member of the Assassin Bug family. Egad, it sounds like you risked your very life while doing this project!
ReplyDeleteFunny, you write up a post basically proving to the whole world that Steve is a super handyman, and all we want to talk about is the bug...Lauren got one of those under her shirt last summer, and it bit her shoulder 3-4 times before we could get it out. She had huge welts! Sorry--am I turning this into a bug blog? :)
ReplyDeleteWell, the bug is quite a topic. Thanks for checking out the blog. I'm sure Joel would have no problem making something like this for you guys.
DeleteWould you be able to share the plans? I'm planning built ins in a couple places in our house and would love to have measurements that I could compare to for our own space.
DeleteHoly AMAZING!!! Love love love these bookshelves! You two are an incredibly talented and creative duo! Love the entire color scheme and look of your home. Beautiful!!!
ReplyDeleteThanks Lisa! Great to hear from you. Hope you and your family are well. I would LOVE to see pictures of your new home too.
Deletelove love love love love the bookshelves! I have the perfect wall for Steve and you to come and put them in my house! :) so exciting you were featured!! Congrats on a beautiful home!
ReplyDeleteHi, I just found you through Cottage & Vine. What a beautiful job you both did. It is lovely,
ReplyDeleteThis is so beautiful! Awesome job!
ReplyDeleteAwesome project, Tracy! I'd love to pin it to our Small Spaces, Big Impact board on Pinterest. You can find it here: http://www.pinterest.com/homedepot/. -Whitney, Senior Editor @ Home Depot
ReplyDeleteThanks Whitney! Your welcome to pin my projects anytime. I'm working on several projects right now for the CWTS contest and we're using several things from Home Depot.
ReplyDeleteHi! Tracy!
ReplyDeleteThis post is really awesome. Thank you for sharing that.
Plywood Company in India
They bookcase wall came out beautiful. I love the colors you chose.
ReplyDeleteHi! how did you install the lights? looking at doing something similar and would love some tips!
ReplyDeleteWhat is the height of the ceiling in this room?
ReplyDeletegreat job, thank you for the help
ReplyDeleteLovely! What is the paint color on the breadboard and walls?
ReplyDeleteYou inspired our office built-in project I recently shared on my blog, thank you! www.domesticdeadline.com
ReplyDeleteThis looks so amazing! Can I ask what how long the shelves are?
ReplyDeleteHi. How did you run the electrical for those sconces on the face of the library shelves? I'm just wondering how the wiring is hidden. I am thinking of taking on a project like this. Thanks!
ReplyDeleteI haven't been back to this site for a while and realize you probably won't read this but I wanted to answer your question anyway... There was a switched outlet along that back wall already. I took the switched power cable and that became the power for the lights. The power outlet (there are two actually) are still there, inside the base cabinets. We have a radio inside the cabinets that we use sometime and thats where we plug it into.
DeleteJust stumbled onto your blog and LOVE IT! I think that we must have the same exact tastes in decorating. Your library is beautiful.
ReplyDeleteLike!!!
ReplyDeleteI loved this post. This looks so organized and elegant. A great woodworking enthusiast, I keep making new projects!I made a rustic wooden pallet bookshelf and followed this tutorial
ReplyDeleteCan you come build this for me? Serious question...I live in St Petersburg, FL.
ReplyDeletecustom cabinets Thanks for a very interesting blog. What else may I get that kind of info written in such a perfect approach? I’ve a undertaking that I am simply now operating on, and I have been at the look out for such info.
ReplyDeleteVery helpful! Thank you!
ReplyDeletehttps://bayanlarsitesi.com/
ReplyDeleteCihangir
Heybeliada
Yalova
Adana
0ZP03
Bolu Lojistik
ReplyDeleteMardin Lojistik
Kocaeli Lojistik
Diyarbakır Lojistik
İstanbul Lojistik
GMXJ
maraş evden eve nakliyat
ReplyDeletemaraş evden eve nakliyat
izmir evden eve nakliyat
konya evden eve nakliyat
erzurum evden eve nakliyat
BDTX15
kayseri evden eve nakliyat
ReplyDeleteantalya evden eve nakliyat
izmir evden eve nakliyat
nevşehir evden eve nakliyat
kayseri evden eve nakliyat
5İ7C
7002A
ReplyDeleteMardin Evden Eve Nakliyat
Nevşehir Evden Eve Nakliyat
Çankaya Fayans Ustası
Altındağ Fayans Ustası
Ankara Fayans Ustası
Kayseri Parça Eşya Taşıma
Uşak Evden Eve Nakliyat
Yozgat Şehir İçi Nakliyat
Düzce Evden Eve Nakliyat
6CE52
ReplyDeleteKripto Para Madenciliği Nedir
Coin Oynama
Binance Nasıl Kayıt Olunur
Coin Nasıl Oynanır
Binance Madenciliği Nedir
Bitcoin Oynama
Binance Kimin
Kripto Para Kazma
Kripto Para Nasıl Oynanır
29B59
ReplyDeleteBinance Referans Kodu
Btcturk Borsası Güvenilir mi
Youtube Beğeni Satın Al
Sohbet
Twitter Trend Topic Hilesi
Bitcoin Kazanma
Kwai Beğeni Satın Al
Referans Kimliği Nedir
Kripto Para Kazma Siteleri
6161F
ReplyDeletezkswap
layerzero
trezor suite
DefiLlama
pancakeswap
spookyswap
sushiswap
pinksale
dao maker